U0110

Temperature data logger with built-in sensor
U0110

Temperature data logger with built-in sensor

Manufacturers

Features
  • Internal temperature sensor
  • Measuring temperature range -30...+70 °C
  • Sampling interval 1 s to 24 h
  • Memory capacity up to 500 000 values
  • USB-C terminal
Description

U0110 data logger is designed for logging temperature into the internal non-volatile memory. The data can be transferred to a PC via USB-C. In case of exceeded set limits alarms are indicated by LED, LCD and acoustically by built-in beeper.


Temperature data logger with built-in sensor
Technical data
Temperature Measuring Range -30...+70 °C
Operating temperature range -30...+70°C
Response time T90 = 15 min
Power battery 3.6V
PC interface USB-C terminal
Sampling interval in data logging mode 10s to 24hours (18 adjustable intervals)
Total memory capacity up to 500 000 recorded values in noncyclic version
up to 350 000 recorded values is cyclic version
Data logging modes noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new
Protection IP67
Documents

More products from - Comet System s.r.o


C4130 - Baro-thermo-hygrometer with internal sensors
C4130 - Baro-thermo-hygrometer with internal sensors
  • Hygro-baro-thermometer
  • D4130 with logger function
  • Temperature sensor RTD Ni1000 6180 ppm/ °C
  • Accuracy ±2.5 %RH; ±2 hPa; ±0.4 °C
  • Total capacity of 16000 values
  • PC interface serial RS-232

D02xx - Single or twochannel thermometers-loggers
D02xx - Single or twochannel thermometers-loggers
  • One or two external probes
  • Pt1000 / Ni1000 RTD sensors
  • Measuring temperature range -50...+500 °C
  • Sampling interval 10 s to 24 h
  • Memory capacity 16 000 values
  • RS232 interface, software package

D4130 - Logging baro-thermo-hygrometer
D4130 - Logging baro-thermo-hygrometer
  • Included traceable calibration certificate
  • Dual line LCD display with special symbols
  • Dew-point reading
  • Barometric pressure tendency reading for last three hours
  • Memory of minimum and maximum values

D4141 - Logging baro-thermo-hygrometer with probe
D4141 - Logging baro-thermo-hygrometer with probe
  • Hygro-baro-thermometer
  • MIN, MAX, HOLD function
  • Resolution 0,1 % RH; 0,1 hPa; 0,1 °C
  • Accuracy ±2.5 % RH; ±2 hPa; ±0.4 °C
  • Total capacity of 16000 values
  • PC interface serial RS232