T7510

Temperature humidity transmitter with Ethernet interface

Features
  • http, smtp, snmp, telnet, www pages, Modbus TCP
  • Alarm functions: e-mail, traps, syslog, www pages
  • Online dew point temperature, absolute humidity, specific humidity, mixing ratio
  • Long term stability of temperature, humidity, pressure
Description

Ethernet  sensor  is  designed  for  measurement  of  temperature,  barometric  pressure,  relative humidity,  dew  point  temperature,  absolute  humidity,  specific  humidity,  mixing  ratio  or  specific  enthalpy. Degrees  Celsius  and  Fahrenheit  are  user  selectable. Large  dual  line  LCD  for  simultaneous  display  of temperature,  pressure  or  relative  humidity  or  other  calculated  humidity  interpretation  is  an  advantage. 

Display is possible to switch off. State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitter is designed for use in non-aggressive environment. Online data acquisition system from transmitters connected to Ethernet/Internet can be easily built by means of Comet software package Database Sensor Monitor.


Technical data
Accuracy and range of temperature ±0.6°C, range -30...+80 °C
Supported temperature units degrees Celsius, degrees Fahrenheit
Measuring range of relative humidity 0...100%
Supported pressure units hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2
Operating temperature range -30...+80°C
Operating temperature range of LCD display readable to 70°C, it is recommended to switch OFF the LCD over 70°C
Range of temperature compensation of RH sensor -30...+80°C
Filtering ability of sensor cover 0.025mm
Protection case with electronics IP30, T+RH probe IP40
LAN connector connector RJ-45
Power 9...30Vdc, maximum consumption about 1W
Power over Ethernet for power over Ethernet any PoE splitter is necessary - e.g. D-Link DWL-P50
Power connector axial, diameter 5.5 x 2.1 mm