T7510

Temperature humidity transmitter with Ethernet interface

Features
  • http, smtp, snmp, telnet, www pages, Modbus TCP
  • Alarm functions: e-mail, traps, syslog, www pages
  • Online dew point temperature, absolute humidity, specific humidity, mixing ratio
  • Long term stability of temperature, humidity, pressure
Description

Ethernet  sensor  is  designed  for  measurement  of  temperature,  barometric  pressure,  relative humidity,  dew  point  temperature,  absolute  humidity,  specific  humidity,  mixing  ratio  or  specific  enthalpy. Degrees  Celsius  and  Fahrenheit  are  user  selectable. Large  dual  line  LCD  for  simultaneous  display  of temperature,  pressure  or  relative  humidity  or  other  calculated  humidity  interpretation  is  an  advantage. 

Display is possible to switch off. State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitter is designed for use in non-aggressive environment. Online data acquisition system from transmitters connected to Ethernet/Internet can be easily built by means of Comet software package Database Sensor Monitor.


Technical data
Accuracy and range of temperature ±0.6°C, range -30...+80 °C
Supported temperature units degrees Celsius, degrees Fahrenheit
Measuring range of relative humidity 0...100%
Supported pressure units hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2
Operating temperature range -30...+80°C
Operating temperature range of LCD display readable to 70°C, it is recommended to switch OFF the LCD over 70°C
Range of temperature compensation of RH sensor -30...+80°C
Filtering ability of sensor cover 0.025mm
Protection case with electronics IP30, T+RH probe IP40
LAN connector connector RJ-45
Power 9...30Vdc, maximum consumption about 1W
Power over Ethernet for power over Ethernet any PoE splitter is necessary - e.g. D-Link DWL-P50
Power connector axial, diameter 5.5 x 2.1 mm

Similar Products


E2007-HF - Heat flux transmitter
E2007-HF - Heat flux transmitter
  • Measurements from 2 to 2000 W/m2
  • Excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • 0-10 V or 4-20 mA analog output options
  • Ideal for building climate control

E2227 - Interior humidity & temperature transmitter
E2227 - Interior humidity & temperature transmitter
  • Digital sensors with excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • Two configurable 0-10 V / 4-20 mA outputs

P8610 - Industrial Ethernet Thermometer
P8610 - Industrial Ethernet Thermometer
  • Celsius- and Fahrenheit degrees supported
  • http, smtp, snmp, SOAP, telnet, www pages, Modbus TCP ..
  • Alarm functions: e-mail, traps, syslog, www pages
  • Long term stability of temperature

T4511 - Intelligent temperature transducer
T4511 - Intelligent temperature transducer
  • Measuring range: -200 to +600°C
  • Accuracy of the input without probes: ±0.2°C
  • Protection: IP20 electronics
  • LAN connection: RJ-45 connector
  • Power: 9-30Vdc, maximum consumption 200mA
  • Power connector: co-axial, diameter 5 x 2.1 mm

T3110 - Humidity and temperature transmitter
T3110 - Humidity and temperature transmitter
  • Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23 °C
  • Accuracy of temperature output: ±0.4 °C from -30 to +100 °C
  • Accuracy of dew point temperature output: ±0.5 °C from 30 to 95 %RH

T3111 - Programmable humidity, temperature and dew point transmitter
T3111 - Programmable humidity, temperature and dew point transmitter
  • Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23°C
  • Accuracy of temperature output: ±0.4°C from -30 to +100°C
  • Accuracy of dew point temperature output: ±0.5°C from 30 to 95% RH

T3117 - Programmable humidity, temperature and dew point transmitter
T3117 - Programmable humidity, temperature and dew point transmitter
  • Air relative humidity range: 0 to 100 %RH
  • Accuracy of temperature output: ±0.4 °C from -30 to +100 °C
  • Range of humidity sensor temperature compensation: -30 to +125 °C
  • Power: 9-30 Vdc

T02xx - Programmable humidity, temperature and dew point transmitters
T02xx - Programmable humidity, temperature and dew point transmitters
  • With 0-10 V output
  • Dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy
  • Easy programming, adjustment, calibration

T4111 - Programmable temperature transmitter
T4111 - Programmable temperature transmitter
  • Temperature operating range: -30...+80°C
  • Current output - two-wire connection: 4...20 mA
  • User adjustable from the PC
  • Protection class: IP65
  • Power: 9...30Vdc

T3311 - Relative humidity, temperature and dew point transmitter
T3311 - Relative humidity, temperature and dew point transmitter
  • Temperature sensor: RTD Pt1000-3850ppm/°C
  • Measuring range: 0...100 %RH, -30...+80 °C
  • Accuracy: ±0.4°C
  • RS232 serial output

T3411 - Relative humidity, temperature and dew point transmitter
T3411 - Relative humidity, temperature and dew point transmitter
  • Temperature sensor RTD Pt1000-3850ppm/°C
  • Measuring range 0...100 %RH, -30...+80 °C
  • Accuracy ±2.5 %RH from 5..95% at 23 °C
  • Range of temperature compensation of the humidity sensor -30...+80 °C

T3413D - Relative humidity, temperature and dew point transmitter
T3413D - Relative humidity, temperature and dew point transmitter
  • Temperature sensor RTD Pt1000-3850ppm/°C
  • Measuring temperature range -30 to +125 °C
  • Measuring air relative humidity range 0..100%
  • Accuracy ±2.5 %RH from 5..95% at 23 °C

P0120 - Temperature sensors and transducers
P0120 - Temperature sensors and transducers
  • Temperature measuring and operating range: -30...+80°C
  • Accuracy: ±0.4°C
  • Applied sensor: Pt100, Pt1000/3850ppm
  • Protection class: IP65
  • Power: 9 to 30 V DC (typically 24V)

T4311 - Temperature transducer
T4311 - Temperature transducer
  • Temperature input: Pt1000 - 3850ppm/°C
  • Measuring temperature range: -200...+600°C
  • Accuracy of the input without probes: ±0.2°C
  • Operating temperature range: -30 to +70°C
  • Communication protocol: ModBus and Advantech ADAM compatible protocol

T4411 - Temperature transducer
T4411 - Temperature transducer
  • Temperature input: Pt1000 - 3850ppm/°C
  • Measuring temperature range: -200...+600°C
  • Operating temperature range: -30...+70°C,
  • Communication protocol: ModBus and Advantech ADAM compatible protocol

COT212 - CO2 and temperature transmitter
COT212 - CO2 and temperature transmitter
  • Range 0...5000 ppm CO2
  • Two-lines 10-digits LCD display
  • Attached sensors 0...+50 °C
  • Remote probe 20...+80 °C
  • 0-5/10 V or 0/4-20 mA outputs
  • Software or DIP switch configuration

CTV110 - Air velocity and temperature transmitter
CTV110 - Air velocity and temperature transmitter
  • Air velocity 0...30 m/s
  • Temperature 0...+50 °C
  • 10-digits LCD display
  • Wall and duct mount versions
  • 0-10 V or 4-20 mA output
  • Software or DIP switch configuration

P86x1 - Ethernet thermo-hygrometer
P86x1 - Ethernet thermo-hygrometer
  • Temperature and relative humidity
  • http, smtp, snmp, SOAP, telnet, www pages, Modbus TCP ..
  • Alarm functions: e-mail, traps, syslog, www pages
  • Up to 4 external temperature probes
  • Long term stability of temperature

T6640 - Remote thermo-hygro-CO2-meter with Ethernet interface + PoE
T6640 - Remote thermo-hygro-CO2-meter with Ethernet interface + PoE
  • Measurement of temperature, humidity and CO2
  • Temperature measuring range -30...+80 °C
  • Humidity measuring range 5...95 %RH
  • CO2 range 0...2000 ppm
  • LCD display
  • Easy wireless communication
  • PoE feature

HF4 - Humidity & temperature transmitter
HF4 - Humidity & temperature transmitter
  • Relative humidity, temperature measurementand dew point calculation
  • Outstanding accuracy and repeatability
  • Hygromer® IN-1 humidity sensor
  • Auto-diagnostics and automatic correction
  • Selectable and scalable analog outputs
  • Various digital outputs