T7510

Temperature humidity transmitter with Ethernet interface
T7510

Temperature humidity transmitter with Ethernet interface

Product Categories

Features
  • http, smtp, snmp, telnet, www pages, Modbus TCP
  • Alarm functions: e-mail, traps, syslog, www pages
  • Online dew point temperature, absolute humidity, specific humidity, mixing ratio
  • Long term stability of temperature, humidity, pressure
Description

Ethernet  sensor  is  designed  for  measurement  of  temperature,  barometric  pressure,  relative humidity,  dew  point  temperature,  absolute  humidity,  specific  humidity,  mixing  ratio  or  specific  enthalpy. Degrees  Celsius  and  Fahrenheit  are  user  selectable. Large  dual  line  LCD  for  simultaneous  display  of temperature,  pressure  or  relative  humidity  or  other  calculated  humidity  interpretation  is  an  advantage. 

Display is possible to switch off. State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitter is designed for use in non-aggressive environment. Online data acquisition system from transmitters connected to Ethernet/Internet can be easily built by means of Comet software package Database Sensor Monitor.


Temperature humidity transmitter with Ethernet interface
Technical data
Accuracy and range of temperature ±0.6°C, range -30...+80 °C
Supported temperature units degrees Celsius, degrees Fahrenheit
Measuring range of relative humidity 0...100%
Supported pressure units hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2
Operating temperature range -30...+80°C
Operating temperature range of LCD display readable to 70°C, it is recommended to switch OFF the LCD over 70°C
Range of temperature compensation of RH sensor -30...+80°C
Filtering ability of sensor cover 0.025mm
Protection case with electronics IP30, T+RH probe IP40
LAN connector connector RJ-45
Power 9...30Vdc, maximum consumption about 1W
Power over Ethernet for power over Ethernet any PoE splitter is necessary - e.g. D-Link DWL-P50
Power connector axial, diameter 5.5 x 2.1 mm
Documents

Similar Products


E2227 - Interior humidity & temperature transmitter
E2227 - Interior humidity & temperature transmitter
  • Digital sensors with excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • Two configurable 0-10 V / 4-20 mA outputs

HM110 - Humidity transmitter
HM110 - Humidity transmitter
  • Measuring range: 0...100 %HR
  • 0-10 V or 4-20 mA analog output
  • Probe: ambient
  • Housing: ABS - IP30
  • Software configuration
  • Mounting with 1/4 turn system with wall-mount plate

T3511 - Intelligent humidity, temperature and dew point transmitter with probe
T3511 - Intelligent humidity, temperature and dew point transmitter with probe
  • Air relative humidity range: 0 to 100%
  • Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23 °C
  • Range of RH sensor temperature compensation: -30 to +105 °C
  • LAN connection: RJ45 interface

T3118 - Temperature and humidity transmitter
T3118 - Temperature and humidity transmitter
  • Outputs: 4-20 mA
  • Dual line LCD
  • Long term stability of parameters
  • Easy programming, adjustment, calibration

T3110 - Humidity and temperature transmitter
T3110 - Humidity and temperature transmitter
  • Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23 °C
  • Accuracy of temperature output: ±0.4 °C from -30 to +100 °C
  • Accuracy of dew point temperature output: ±0.5 °C from 30 to 95 %RH

T3111 - Programmable humidity, temperature and dew point transmitter
T3111 - Programmable humidity, temperature and dew point transmitter
  • Accuracy of relative humidity measurement: ±2.5% relative humidity from 5 to 95% at 23°C
  • Accuracy of temperature output: ±0.4°C from -30 to +100°C
  • Accuracy of dew point temperature output: ±0.5°C from 30 to 95% RH

T3117 - Programmable humidity, temperature and dew point transmitter
T3117 - Programmable humidity, temperature and dew point transmitter
  • Air relative humidity range: 0 to 100 %RH
  • Accuracy of temperature output: ±0.4 °C from -30 to +100 °C
  • Range of humidity sensor temperature compensation: -30 to +125 °C
  • Power: 9-30 Vdc

T02xx - Programmable humidity, temperature and dew point transmitters
T02xx - Programmable humidity, temperature and dew point transmitters
  • With 0-10 V output
  • Dew point temperature, absolute humidity, specific humidity, mixing ratio, specific enthalpy
  • Easy programming, adjustment, calibration

T3311 - Relative humidity, temperature and dew point transmitter
T3311 - Relative humidity, temperature and dew point transmitter
  • Temperature sensor: RTD Pt1000-3850ppm/°C
  • Measuring range: 0...100 %RH, -30...+80 °C
  • Accuracy: ±0.4°C
  • RS232 serial output

T3411 - Relative humidity, temperature and dew point transmitter
T3411 - Relative humidity, temperature and dew point transmitter
  • Temperature sensor RTD Pt1000-3850ppm/°C
  • Measuring range 0...100 %RH, -30...+80 °C
  • Accuracy ±2.5 %RH from 5..95% at 23 °C
  • Range of temperature compensation of the humidity sensor -30...+80 °C

T3413D - Relative humidity, temperature and dew point transmitter
T3413D - Relative humidity, temperature and dew point transmitter
  • Temperature sensor RTD Pt1000-3850ppm/°C
  • Measuring temperature range -30 to +125 °C
  • Measuring air relative humidity range 0..100%
  • Accuracy ±2.5 %RH from 5..95% at 23 °C

E2228-DM - Duct mount humidity & temperature transmitter
E2228-DM - Duct mount humidity & temperature transmitter
  • Digital sensors with excellent repeatability and stability
  • Fully calibrated and temperature compensated
  • RS485 Modbus RTU interface
  • 0-10 V or 4-20 mA switchable analog output
  • Two relays for thermostat / hygrostat functionality

E2228 - Humidity & temperature transmitter
E2228 - Humidity & temperature transmitter
  • Digital sensors in miniature tube
  • Fully calibrated and temperature compensated
  • 0-10 V or 4-20 mA switchable analog output
  • RS485 Modbus RTU interface
  • Two relays for thermostat / hygrostat functionality

E2218 - Humidity & temperature transmitter
E2218 - Humidity & temperature transmitter
  • Industrial IP65 protected enclosure
  • Two 0-10 V or 4-20 mA switchable analog outputs
  • RS485 Modbus RTU digital interface
  • Attached or remote probes

E2218-DM - Duct mount humidity & temperature transmitter
E2218-DM - Duct mount humidity & temperature transmitter
  • Mountable into ventilation airducts
  • Relative/absolute humidity, dew point, T
  • Industrial IP65 protected enclosure
  • Two configurable 0-10 V / 4-20 mA outputs
  • RS485 Modbus RTU digital interface

T6640 - Remote thermo-hygro-CO2-meter with Ethernet interface + PoE
T6640 - Remote thermo-hygro-CO2-meter with Ethernet interface + PoE
  • Measurement of temperature, humidity and CO2
  • Temperature measuring range -30...+80 °C
  • Humidity measuring range 5...95 %RH
  • CO2 range 0...2000 ppm
  • LCD display
  • Easy wireless communication
  • PoE feature

HC2A-xx - Humidity probes
HC2A-xx - Humidity probes
  • Measures relative humidity and temperature
  • Outstanding accuracy, repeatability and long-term stability

HF4 - Humidity & temperature transmitter
HF4 - Humidity & temperature transmitter
  • Relative humidity, temperature measurementand dew point calculation
  • Outstanding accuracy and repeatability
  • Hygromer® IN-1 humidity sensor
  • Auto-diagnostics and automatic correction
  • Selectable and scalable analog outputs
  • Various digital outputs

E2244 - Humidity & temperature transmitter
E2244 - Humidity & temperature transmitter
  • Wall mounting or ventilation airducts mounting (as option)
  • Relative humidity, ambient temperature measurement
  • Industrial IP65 protected enclosure
  • Two configurable 0-10 V / 4-20 mA outputs
Show more ▼