COST

Carbon monoxide detector

Features
  • Range 0...500 ppm CO
  • 10-digits LCD display
  • Wall and duct mount versions
  • One SPDT relay 3 A / 230 VAC
  • Software or DIP switch configuration
Description

Versions and order codes

COST-
            -S  wall mount


Similar Products


Clip - Personal single gas detector
Clip - Personal single gas detector
  • Ensures worker safety
  • Short training time
  • No need for service or maintenance
  • Adjustable alarm levels
  • Real time gas reading or life left indication
  • Self test and test due indication

Gasman - Personal single gas detector
Gasman - Personal single gas detector
  • Available for flammable gas, oxygen and toxic gases
  • Rechargeable versions for all gas types
  • Non rechargeable for oxygen and toxic gases
  • Loud 95dBA audible alarm

Tetra - Personal multigas monitor
Tetra - Personal multigas monitor
  • Battery non- or rechargeable options
  • Graphic LCD for clear view
  • Single button operation
  • Loud 94dBA audible alarm
  • Shock and vibration resistant, IP 65

TXgard+ - Toxic and oxygen gas detector
TXgard+ - Toxic and oxygen gas detector
  • Calibration can be performed locally without the need for hot work permits
  • Local display and magnetic key enable calibration without opening the junction box
  • 4...20mA signal is provided
  • Optional alarm and fault relays are available

TXgard-IS+ - Toxic and oxygen gas detector
TXgard-IS+ - Toxic and oxygen gas detector
  • Wide choice of sensors available
  • Local calibration option
  • 2-wire 4-20mA
  • Operating range: -20...+55 °C, 15...90% RH
  • ABS plastic housing, IP65

E2610-CO - Carbon Monoxide detector
E2610-CO - Carbon Monoxide detector
  • Stable long-life electrochemical sensor
  • Range 0...200 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPDT relays
  • UART digital interface

E2608-CO - Carbon Monoxide Detector
E2608-CO - Carbon Monoxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPST relays
  • 2 × 4-20 mA or 0-10 V, RS485

E2618-CO - Carbon Monoxide Transmitter
E2618-CO - Carbon Monoxide Transmitter
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • 2 × 4-20 mA or 0-10 V, RS485

Tetra-3 - Personal four-gas monitor
Tetra-3 - Personal four-gas monitor
  • Top display, single button operation
  • Water and dust resistant up to IP67
  • 95dB audible, vibration and visual alarms
  • Li-ion battery for over 14 h operation
  • Data logging (>12000 logs)

Xsafe - Gas detector for non-hazardous areas
Xsafe - Gas detector for non-hazardous areas
  • Aluminium junction box
  • Working range: -40...+80°C, 0-99% RH
  • 3-wire 4-20 mA
  • IP65
  • Deploy in non-hazardous environment

CO-110 - Portable CO and temperature meter
CO-110 - Portable CO and temperature meter
  • 0...500 ppm CO
  • -20...+80 °C
  • hold-min-max functions
  • adjustable shut-off and backlight
  • ABS enclosure, IP54 protection

CO-050 - Portable CO and temperature meter
CO-050 - Portable CO and temperature meter
  • Auto shut-off: 20 minutes
  • Built-in probe
  • HOLD function
  • ABS enclosure, IP54 protection

E2630-CO - Carbon Monoxide Detector
E2630-CO - Carbon Monoxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...200 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPDT relays
  • UART digital interface

E2660-CO-NO2 - Carbon Monoxide-Nitrogen Dioxide Transmitter
E2660-CO-NO2 - Carbon Monoxide-Nitrogen Dioxide Transmitter
  • Simultaneous CO and NO2 monitoring
  • RS485 Modbus RTU digital interface
  • Two analog outputs 4-20 mA / 0-10 V
  • Easy-to-install IP65 protected enclosure
  • Attached or remote sensor
  • Two SPST relays option
  • Acoustic alarm option

E2638-CO - Carbon Monoxide Detector
E2638-CO - Carbon Monoxide Detector
  • Long-life electrochemical cell
  • Ranges 0...300 / 0...1000 ppm CO
  • Resolution 1 ppm CO
  • 4-20 mA / 0-10 V, RS485
  • Remote probe option
  • LCD option

E2660-CO-CO2 - Carbon Monoxide-Carbon Dioxide Transmitter
E2660-CO-CO2 - Carbon Monoxide-Carbon Dioxide Transmitter
  • Simultaneous CO and CO2 monitoring
  • RS485 Modbus RTU digital interface
  • Two analog outputs 4-20 mA / 0-10 V
  • Easy-to-install IP65 protected enclosure
  • Attached or remote sensor
  • Two SPST relays option
  • Acoustic alarm option

E2615-CO - Carbon Monoxide Transmitter
E2615-CO - Carbon Monoxide Transmitter
  • High long-term stability
  • User selectable output 4-20 mA / 0-10 V
  • Range of compact wall mount enclosures
  • Low cost for volume HVAC applications

E2648-CO - Carbon Monoxide Detector
E2648-CO - Carbon Monoxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485

E2660-CO-NO - Carbon Monoxide-Nitric Oxide Transmitter
E2660-CO-NO - Carbon Monoxide-Nitric Oxide Transmitter
  • Simultaneous CO and NO monitoring
  • RS485 Modbus RTU digital interface
  • Two analog outputs 4-20 mA / 0-10 V
  • Easy-to-install IP65 protected enclosure
  • Attached or remote sensor
  • Two SPST relays option
  • Acoustic alarm option

HQ210 - Thermo-hygro-air quality meter
HQ210 - Thermo-hygro-air quality meter
  • Measurement of carbon dioxide, humidity and temperature
  • Up to six measurements simultaneously
  • Interchangeable measurement modules
  • Large graphic display
  • Calibration certificate

E2632-CO-CH4 - Two Channel Gas Detectors
E2632-CO-CH4 - Two Channel Gas Detectors
  • Simultaneous detection of two gases
  • Accurate and stable measurement
  • Wall-mount IP65 protected housing
  • Visual and acoustic alarms
  • Two output relays for alarm / ventilation control

E2670-CO - Flameproof Carbon Monoxide Detector
E2670-CO - Flameproof Carbon Monoxide Detector
  • Suitable for ATEX Zones 2 and 22
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485