E2660-CO-NO2

Carbon Monoxide-Nitrogen Dioxide Transmitter

Features
  • Simultaneous CO and NO2 monitoring
  • RS485 Modbus RTU digital interface
  • Two analog outputs 4-20 mA / 0-10 V
  • Easy-to-install IP65 protected enclosure
  • Attached or remote sensor
  • Two SPST relays option
  • Acoustic alarm option
Description

E2660-CO-NO2 detector-transmitter is an easy-to-use instrument intended for simultaneous monitoring of carbon monoxide and nitrogen dioxide concentration. It is an excellent solution for underground parkings. The device may be also used in boiler houses and other confined spaces, where potentially toxic concentration of carbon monoxide and nitrogen dioxide can accumulate.

The instrument utilises novel fully calibrated and temperature compensated electrochemical gas sensors with excellent repeatability, stability and long lifetime.

Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the transmitter to safety or building automation systems.


Technical data
Sensors type Electrochemical cell
Sampling method Diffusion
Detection ranges 0...300 ppm / 0...1000 ppm CO
0...20 ppm / 0...200 ppm NO2
Resolution 1 ppm vol CO
0,1 ppm NO2
Sensor lifetime > 2 years
Calibration interval 6 months
Power supply 12...36 VDC (default),
24 VAC or 230 VAC as options
Analog outputs two 4-20 mA / 0-10 V (user settable)
Enclosure grey ABS plastic, IP65
Dimensions H90 × W145 × D50 mm
Operating conditions -20...+50 °C, 15...90 %RH

Similar Products


Clip - Personal single gas detector
Clip - Personal single gas detector
  • Ensures worker safety
  • Short training time
  • No need for service or maintenance
  • Adjustable alarm levels
  • Real time gas reading or life left indication
  • Self test and test due indication

Gasman - Personal single gas detector
Gasman - Personal single gas detector
  • Available for flammable gas, oxygen and toxic gases
  • Rechargeable versions for all gas types
  • Non rechargeable for oxygen and toxic gases
  • Loud 95dBA audible alarm

Tetra - Personal multigas monitor
Tetra - Personal multigas monitor
  • Battery non- or rechargeable options
  • Graphic LCD for clear view
  • Single button operation
  • Loud 94dBA audible alarm
  • Shock and vibration resistant, IP 65

TXgard+ - Toxic and oxygen gas detector
TXgard+ - Toxic and oxygen gas detector
  • Calibration can be performed locally without the need for hot work permits
  • Local display and magnetic key enable calibration without opening the junction box
  • 4...20mA signal is provided
  • Optional alarm and fault relays are available

TXgard-IS+ - Toxic and oxygen gas detector
TXgard-IS+ - Toxic and oxygen gas detector
  • Wide choice of sensors available
  • Local calibration option
  • 2-wire 4-20mA
  • Operating range: -20...+55 °C, 15...90% RH
  • ABS plastic housing, IP65

E2610-CO - Carbon Monoxide detector
E2610-CO - Carbon Monoxide detector
  • Stable long-life electrochemical sensor
  • Range 0...200 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPDT relays
  • UART digital interface

E2608-CO - Carbon Monoxide Detector
E2608-CO - Carbon Monoxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPST relays
  • 2 × 4-20 mA or 0-10 V, RS485

E2618-CO - Carbon Monoxide Transmitter
E2618-CO - Carbon Monoxide Transmitter
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • 2 × 4-20 mA or 0-10 V, RS485

Tetra-3 - Personal four-gas monitor
Tetra-3 - Personal four-gas monitor
  • Top display, single button operation
  • Water and dust resistant up to IP67
  • 95dB audible, vibration and visual alarms
  • Li-ion battery for over 14 h operation
  • Data logging (>12000 logs)

Xsafe - Gas detector for non-hazardous areas
Xsafe - Gas detector for non-hazardous areas
  • Aluminium junction box
  • Working range: -40...+80°C, 0-99% RH
  • 3-wire 4-20 mA
  • IP65
  • Deploy in non-hazardous environment

CO-110 - Portable CO and temperature meter
CO-110 - Portable CO and temperature meter
  • 0...500 ppm CO
  • -20...+80 °C
  • hold-min-max functions
  • adjustable shut-off and backlight
  • ABS enclosure, IP54 protection

CO-050 - Portable CO and temperature meter
CO-050 - Portable CO and temperature meter
  • Auto shut-off: 20 minutes
  • Built-in probe
  • HOLD function
  • ABS enclosure, IP54 protection

COST - Carbon monoxide detector
COST - Carbon monoxide detector
  • Range 0...500 ppm CO
  • 10-digits LCD display
  • Wall and duct mount versions
  • One SPDT relay 3 A / 230 VAC
  • Software or DIP switch configuration

E2630-CO - Carbon Monoxide Detector
E2630-CO - Carbon Monoxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...200 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPDT relays
  • UART digital interface

E2638-CO - Carbon Monoxide Detector
E2638-CO - Carbon Monoxide Detector
  • Long-life electrochemical cell
  • Ranges 0...300 / 0...1000 ppm CO
  • Resolution 1 ppm CO
  • 4-20 mA / 0-10 V, RS485
  • Remote probe option
  • LCD option

E2660-CO-CO2 - Carbon Monoxide-Carbon Dioxide Transmitter
E2660-CO-CO2 - Carbon Monoxide-Carbon Dioxide Transmitter
  • Simultaneous CO and CO2 monitoring
  • RS485 Modbus RTU digital interface
  • Two analog outputs 4-20 mA / 0-10 V
  • Easy-to-install IP65 protected enclosure
  • Attached or remote sensor
  • Two SPST relays option
  • Acoustic alarm option

E2615-CO - Carbon Monoxide Transmitter
E2615-CO - Carbon Monoxide Transmitter
  • High long-term stability
  • User selectable output 4-20 mA / 0-10 V
  • Range of compact wall mount enclosures
  • Low cost for volume HVAC applications

E2648-CO - Carbon Monoxide Detector
E2648-CO - Carbon Monoxide Detector
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485

E2660-CO-NO - Carbon Monoxide-Nitric Oxide Transmitter
E2660-CO-NO - Carbon Monoxide-Nitric Oxide Transmitter
  • Simultaneous CO and NO monitoring
  • RS485 Modbus RTU digital interface
  • Two analog outputs 4-20 mA / 0-10 V
  • Easy-to-install IP65 protected enclosure
  • Attached or remote sensor
  • Two SPST relays option
  • Acoustic alarm option

HQ210 - Thermo-hygro-air quality meter
HQ210 - Thermo-hygro-air quality meter
  • Measurement of carbon dioxide, humidity and temperature
  • Up to six measurements simultaneously
  • Interchangeable measurement modules
  • Large graphic display
  • Calibration certificate

E2632-CO-CH4 - Two Channel Gas Detectors
E2632-CO-CH4 - Two Channel Gas Detectors
  • Simultaneous detection of two gases
  • Accurate and stable measurement
  • Wall-mount IP65 protected housing
  • Visual and acoustic alarms
  • Two output relays for alarm / ventilation control

E2670-CO - Flameproof Carbon Monoxide Detector
E2670-CO - Flameproof Carbon Monoxide Detector
  • Suitable for ATEX Zones 2 and 22
  • Stable long-life electrochemical sensor
  • Range 0...300 or 0...1000 ppm CO
  • Resolution 1 ppm CO
  • Two SPST relays option
  • 2 × 4-20 mA or 0-10 V, RS485