TXgard-IS+

Toxic and oxygen gas detector

Features
  • Wide choice of sensors available
  • Local calibration option
  • 2-wire 4-20mA
  • Operating range: -20...+55 °C, 15...90% RH
  • ABS plastic housing, IP65
Description

TXgard-IS+ is an Intrinsically Safe detector for toxic gases or oxygen.

It is suitable for use in Zone 0, 1 or 2, or Division 1 / Division 2 hazardous areas when used with a suitable Zener barrier or galvanic isolator. TXgard-IS+ is designed to detect a wide range of gases when fitted with the appropriate electrochemical sensor.

TXgard-IS+ is a loop-powered instrument providing a 4-20 mA signal suitable for direct connection to a control panel. Unlike most other 4-20 mA gas detectors featuring operator display panel (LCD) and keypads, it combines its power and signal in just two wires, so only one barrier is required.



Technical data
Protection class IP65, IP66 with weatherproof cap
Output 4-20mA loop-powered
Operation temperatures -20 °C...+55 °C
Humidity 15 to 90% RH non-condensing
Display 2-line, 16 character LCD
Power 10.8-30 VDC

Similar Products


Gasman - Personal single gas detector
Gasman - Personal single gas detector
  • Available for flammable gas, oxygen and toxic gases
  • Rechargeable versions for all gas types
  • Non rechargeable for oxygen and toxic gases
  • Loud 95dBA audible alarm

Tetra - Personal multigas monitor
Tetra - Personal multigas monitor
  • Battery non- or rechargeable options
  • Graphic LCD for clear view
  • Single button operation
  • Loud 94dBA audible alarm
  • Shock and vibration resistant, IP 65

TXgard+ - Toxic and oxygen gas detector
TXgard+ - Toxic and oxygen gas detector
  • Calibration can be performed locally without the need for hot work permits
  • Local display and magnetic key enable calibration without opening the junction box
  • 4...20mA signal is provided
  • Optional alarm and fault relays are available

E2608-O2 - Oxygen Detector
E2608-O2 - Oxygen Detector
  • Electrochemical sensor
  • Range 0...25 %vol O2
  • Resolution 0,01 %vol O2
  • Two SPST relays
  • 2 × 4-20 mA or 0-10 V, RS485