Features
- Suitable for ATEX Zones 2 and 22
- Electrochemical sensor
- Range 0...25 %vol O2
- Resolution 0,01 %vol O2
- Two SPST relays option
- 2 × 4-20 mA or 0-10 V, RS485
Description
E2670 series is a new line of flameproof detectors-transmitters intended for use in ATEX Zones 2 and 22.
E2670 series devices are based on PluraSens® multifunctional platform.
Oxygen detector-transmitter E2670-O2 may be used to prevent critical decrease of O2 concentration as well as to control the absence of the oxygen in gas mixtures.
The instrument utilises a fully calibrated and temperature compensated gas sensor with excellent repeatability, stability and long lifetime.
Two relays with closing contact (optional) may be used for remote signalling or concentration control. Two alarm set-points are user settable.
Two analog outputs and RS485 digital interface with industry standard Modbus RTU protocol can be used to connect the detector to safety or building automation systems.
Technical data
| Calibration | oxygen O2 |
| Sensor type | electrochemical |
| Sampling method | diffusion |
| Detection range | 0...25 %vol O2 |
| Resolution | 0,01 %vol O2 |
| Sensor lifetime | > 2 years |
| Power supply | 12...36 VDC (default), |
| 24 VAC or 230 VAC as options | |
| Digital interface | RS485, Modbus RTU protocol |
| Analog outputs | 2 × 4-20 mA / 0-10 V, user settable |
| Output relays (option) | 2 × SPST relays (closing contact), |
| Default alarm set-points | 19,5 / 18,0 %vol O2 |
| Enclosure | die-cast aluminium, wall mount, IP65 |
| Dimensions | H155 × W145 × D110 mm |
| Operating conditions | -30...+50 °C, 15...90 %RH |
| safe areas and ATEX Zones 2 and 22 |
